EasyManuals Logo

Cisco 7600-SIP-400 - SPA Interface Processor 400 User Manual

Cisco 7600-SIP-400 - SPA Interface Processor 400
324 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #80 background imageLoading...
Page #80 background image
2-24
Cisco 7600 Series Router Installation Guide
OL-4503-26
Chapter 2 Preparing for Installation
Power Connection Guidelines
Japan, North
America
100–120VAC
operation
3
CAB-7513AC= 14 feet (4.3 m) 20 A, 125 VAC Figure 2-12
Switzerland CAB-ACS-16= 14 feet (4.3 m) 16 A, 250 VA C Figure 2-15
China CAB-AC16A-CH= 14 feet (4.3 m) 16 A, 250 VAC Figure 2-23
Australia,
New
Zealand
CAB-AC-16A-AUS= 14 feet (4.3 m) 16A,250 VAC Figure 2-25
4000 W Power Supply
North America WS-CAC-4000W-US= 12 feet (3.6m) 250VAC, 30A Figure 2-20
International WS-CAC-4000W-INT= 12 feet (3.6m) 250VAC, 30A Figure 2-21
6000 W Power Supply
People’s Republic of
China
CAB-AC16A-CH= 14 feet (4.3 m) 16 A, 250 VAC Figure 2-23
Continental Europe CAB-AC-2500W-EU= 14 feet (4.3 m) 16 A, 250 VAC Figure 2-18
International CAB-AC-2500W-INT= 14 feet (4.3 m) 16 A, 250 VAC Figure 2-10
Israel CAB-AC-2500W-ISRL= 14 feet (4.3 m) 16 A, 250 VA C Figure 2-24
Japan, North
America
(nonlocking plug)
200–240VAC
operation
CAB-AC-2500W-US1= 14 feet (4.3 m) 16 A, 250 VAC Figure 2-19
Japan, North
America (locking
plug)
200–240VAC
operation
CAB-AC-C6K-TWLK= 14 feet (4.3 m) 16 A, 250 VA C Figure 2-13
Japan, North
America
100–120 VAC
4
CAB-7513AC=
4
14 feet (4.3 m) 20 A, 125 VA C Figure 2-12
Switzerland CAB-ACS-16= 14 feet (4.3 m) 16 A, 250 VA C Figure 2-15
Australia,
New
Zealand
CAB-AC-16A-AUS= 14 feet (4.3 m) 16A,250 VAC Figure 2-25
1. The 3000 W power supply operating on 110 VAC delivers 1400 W.
2. The PDU power cable is designed for users who power their switch from a PDU. The end of the cable that plugs into the Cisco
7600 series router chassis has a C19 connector; the other end of the cable that plugs into the PDU has a C20 connector.
3. The 3000 W power supply operating on 110 VAC delivers 1400 W.
4. The 6000 W power supply operating on two 110 VAC inputs delivers 2900 W. When operating with 100–120VAC, you must
use two AC power cords and the power supply output is limited to 2900
W.
Table 2-21 AC-Input Power Cord Options (continued)
Locale Part Number Length Plug Rating
Power Cord
Reference
Illustration

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 7600-SIP-400 - SPA Interface Processor 400 and is the answer not in the manual?

Cisco 7600-SIP-400 - SPA Interface Processor 400 Specifications

General IconGeneral
BrandCisco
Model7600-SIP-400 - SPA Interface Processor 400
CategoryNetwork Router
LanguageEnglish

Related product manuals