Cisco 7911G - IP Phone VoIP User Manual

Chapter 5 Configuring Features, Templates, Services, and Users
Telephony Features Available for the Cisco Unified IP Phone
5-12
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0
OL11954-01
Group call pickup Allows users to pick up incoming calls
within their own group or in other groups.
For more information, refer to the:
• Cisco Unified Communications
Manager Administration
Guide, “Pickup Group
Configuration” chapter
• Cisco Unified Communications
Manager System Guide, “Call
Pickup” chapter
Hold Allows the user to move a connected call
from an active state to a held state.
• Requires no configuration,
unless you want to use music
on hold. See “Music-on-Hold”
in this table for information.
• See also: “Hold Reversion” in
this table.
Hold Reversion Limits the amount of time that a call can be
on hold before reverting back to the phone
that put the call on hold and alerting the
user.
Reverting calls are distinguished from
incoming calls by a single ring (or beep,
depending on the new call indicator setting
for the line). This notification repeats at
intervals if not resumed.
A call that triggers Hold Reversion also
displays an animated icon in the call bubble
and a brief message on the status line.
You can configure call focus priority to
favor incoming or reverting calls.
For more information about
configuring this feature, refer to
Cisco Unified Communications
Manager Features and Services
Guide, “Hold Reversion” chapter.
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description Configuration Reference

Cisco 7911G - IP Phone VoIP Specifications

General

Brand	Cisco
Model	7911G - IP Phone VoIP
Category	IP Phone
Language	English