5-19
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0
OL11954-01
Chapter 5 Configuring Features, Templates, Services, and Users
Telephony Features Available for the Cisco Unified IP Phone
Secure Conference • Allows secure phones to place
conference calls using a secured
conference bridge.
• As new participants are added by using
Confrn, Join, cBarge, Barge softkeys or
MeetMe conferencing, the secure call
icon displays as long as all participants
use secure phones.
• The Conference List displays the
security level of each conference
participant. Initiators can remove
non-secure participants from the
Conference List. (Non-initiators can
add or remove conference participants
if the AdvanceAdhocConference
parameter is set.)
For more information about
security, see the “Overview of
Supported Security Features”
section.
For additional information, refer to
these:
• Cisco Unified
Communications Manager
System Guide, “Conference
Bridges” chapter
• Cisco Unified
Communications Manager
Administration Guide,
“Conference Bridge
Configuration” chapter
• Cisco Unified
Communications Manager
Security Guide.
Services Allows you to use the
Cisco Unified IP Phone Services
Configuration menu in
Cisco Unified Communications Manager
Administration to define and maintain the
list of phone services to which users can
subscribe.
For more information refer to the:
• Cisco Unified Communications
Manager Administration
Guide, Cisco Unified IP
Phone Configuration chapter
• Cisco Unified Communications
Manager System Guide,
“Cisco Unified IP Phone
Services” chapter
Services URL
button
Provides one-touch access to information
services.
Refer to
Cisco Unified Communications
Manager Administration Guide for
configuration procedures.
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description Configuration Reference