Cisco 7911G - IP Phone VoIP User Manual

Chapter 1 An Overview of the Cisco Unified IP Phone
Overview of Configuring and Installing Cisco Unified IP Phones
1-30
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0
OL11954-01
5. Customize softkey templates
(optional).
Adds, deletes, or changes order
of softkey features that display
on the user’s phone to meet
feature usage needs.
Refer to the
Cisco Communications
Manager Administration
Guide,
Softkey Template
Configuration chapter.
See the “Configuring
Softkey Templates”
section on page 5-25.
6. Configure speed-dial buttons and
assign speed-dial numbers
(optional).
Adds speed-dial numbers,
Note Users can change
speed-dial settings on
their phones with
Cisco Unified IP Phone
User Options.
Refer to the
Cisco Communications
Manager Administration
Guide,
Cisco Unified IP Phone
Configuration chapter,
“Configuring Speed-Dial
Buttons” section.
7. Configure Cisco Unified IP Phone
services and assign services
(optional).
Provides IP Phone services.
Note Users can add or change
services on their phones
with the
Cisco Unified IP Phone
User Options.
Refer to the
Cisco Communications
Manager Administration
Guide,
Cisco Unified IP Phone
Services Configuration
chapter.
See the “Setting Up
Services” section on
page 5-25.
Table 1-6 Checklist for Configuring the Cisco Unified IP Phones 7906G and 7911G in
Cisco Unified Communications Manager (continued)
Task Purpose For More Information

Cisco 7911G - IP Phone VoIP Specifications

General

Brand	Cisco
Model	7911G - IP Phone VoIP
Category	IP Phone
Language	English