Cisco 7911G - IP Phone VoIP User Manual

1-31
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0
OL11954-01
Chapter 1 An Overview of the Cisco Unified IP Phone
Overview of Configuring and Installing Cisco Unified IP Phones
8. Assign services to phone buttons
(optional).
Provides single button access to
an IP phone service or URL.
Refer to Cisco Unified
Communications
Manager Administration
Guide, “Cisco Unified IP
Phone Configuration”
chapter, “Adding a Cisco
Unified IP Phone Service
to a Phone Button”
section.
9. Add user information by
configuring required fields
(optional).
– Name (last)
– User ID
– Password (for User Options
web pages)
– PIN (for use with Extension
Mobility
Adds user information to the
global directory for
Cisco Unified Communications
Manager.
Note To search for a user in
the Corporate Directory,
you must add users to
Cisco Unified Communi
cations Manager.
Refer to the
Cisco Communications
Manager Administration
Guide,
“End User Configuration”
chapter.
See the “Adding Users to
Cisco Unified Communic
ations Manager” section
on page 5-26.
10. Associate a user with a phone
(optional).
Provides users with control over
their phone such as forwarding
calls or adding speed-dial
numbers or services.
Note Some phones, such as
those in conference
rooms, do not have an
associated user.
Refer to the
Cisco Communications
Manager Administration
Guide,
“End User Configuration”
chapter, “Associating
Devices to a User”
section.
Table 1-6 Checklist for Configuring the Cisco Unified IP Phones 7906G and 7911G in
Cisco Unified Communications Manager (continued)
Task Purpose For More Information

Cisco 7911G - IP Phone VoIP Specifications

General

Brand	Cisco
Model	7911G - IP Phone VoIP
Category	IP Phone
Language	English