Contents
vi
Cisco Unified IP Phone 7906G and 7911G for Cisco Unified Communications Manager 6.0
OL11954-01
Supporting 802.1X Authentication on Cisco Unified IP Phones 1-23
Overview 1-23
Required Network Components 1-24
Best Practices—Requirements and Recommendations 1-24
Security Restrictions 1-25
Overview of Configuring and Installing Cisco Unified IP Phones 1-26
Configuring Cisco Unified IP Phones in Cisco Unified Communications
Manager
1-26
Checklist for Configuring the Cisco Unified IP Phones 7906G and 7911G
in Cisco Unified Communications Manager
1-27
Installing Cisco Unified IP Phones 1-32
Checklist for Installing the Cisco Unified IP Phones 7906G and
7911G
1-32
CHAPTER
2 Preparing to Install the Cisco Unified IP Phone on Your Network 2-1
Understanding Interactions with Other Cisco Unified Communications
Products
2-2
Understanding How the Cisco Unified IP Phone Interacts with
Cisco Unified Communications Manager
2-2
Understanding How the Cisco Unified IP Phone Interacts with the VLAN 2-3
Providing Power to the Cisco Unified IP Phones 7906G and 7911G 2-4
Power Guidelines 2-5
Power Outage 2-5
Obtaining Additional Information about Power 2-6
Understanding Phone Configuration Files 2-7
SIP Dial Rules 2-8
Understanding the Phone Startup Process 2-8
Adding Phones to the Cisco Unified Communications Manager Database 2-12
Adding Phones with Auto-Registration 2-13
Adding Phones with Auto-Registration and TAPS 2-14
To Next Page
Loading...
