Chapter 5 Configuring Features, Templates, Services, and Users
Telephony Features Available for the Cisco Unified IP Phone
5-16
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.0
OL-11953-01
Immediate
Divert—Enhanced
Allows users to transfer incoming calls
directly to their voice messaging system or to
the voice messaging system of the original
called party.
For more information, refer to:
• Cisco Unified
Communications Manager
System Guide, “Cisco Unified
IP Phones” chapter.
• Cisco Unified Communications
Manager Features and
Services Guide, “Call Park and
Directed Call Park” chapter
Intercom Allows users to place and receive intercom
calls using programmable phone buttons.
You can configure intercom line buttons to:
• Directly dial a specific intercom
extension.
• Initiate an intercom call and then
prompt the user to enter a valid
intercom number.
Note Cisco Extension Mobility does not
support intercom lines.
Cisco Unified Communications
Manager Feature and Services
Guide, “Intercom chapter”
Join
(SCCP phones
only)
Allows user to join two or more calls that
are on one line to create a conference call
and remain on the call.
For more information:
• See the “Configuring Softkey
Templates” section on
page 5-28.
• Refer to Cisco
Unified Communications
Manager System Guide,
“Cisco Unified IP Phones”
chapter.
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description Configuration Reference
To Next Page
Loading...
