Cisco 7961G-GE - IP Phone VoIP

5-17
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.0
OL-11953-01
Chapter 5 Configuring Features, Templates, Services, and Users
Telephony Features Available for the Cisco Unified IP Phone
Log out of hunt
groups
Allows users to log out of a hunt group and
temporarily block calls from ringing their
phone when they are not available to take
calls. Logging out of hunt groups does not
prevent non-hunt group calls from ringing
their phone.
For more information
• See the “Configuring Softkey
Templates” section on p.
• Cisco Communications
Manager System Guide,
“Understanding Route Plans”
chapter.
Malicious caller
identification
(MCID)
(SCCP phones
only)
Allows users to notify the system
administrator about suspicious calls that are
received.
For more information refer to:
• Cisco Unified
Communications Manager
System Guide, “Cisco Unified
IP Phones” chapter.
• Cisco
Unified Communications
Manager Features and
Services Guide, “Malicious
Call Identification” chapter.
Meet-Me
conference
Allows a user to host a Meet-Me conference
in which other participants call a
predetermined number at a scheduled time.
For more information refer to
Cisco Unified Communications
Manager Administration Guide,
“Meet-Me Number/Pattern
Configuration” chapter.
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description Configuration Reference