Cisco 7961G-GE - IP Phone VoIP

5-23
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.0
OL-11953-01
Chapter 5 Configuring Features, Templates, Services, and Users
Telephony Features Available for the Cisco Unified IP Phone
Services URL
button
Allows users to access services from a
programmable button rather than by using
the Services menu on a phone.
For more information refer to:
• Cisco Unified
Communications Manager
Administration Guide, “Cisco
Unified IP Phone
Configuration” chapter.
• Cisco Unified
Communications Manager
System Guide, “Cisco Unified
IP Phone Services” chapter.
Shared line Allows a user to have multiple phones that
share the same phone number or allows a
user to share a phone number with a
coworker.
For more information refer to
Cisco Unified Communications
Manager System Guide, “Cisco
Unified IP Phones” chapter.
Silent Monitoring Allows a supervisor to silently monitor an
active call. The supervisor cannot be heard
by either party on the call. The user might
hear an intermittent tone
(beep tone) during a call when it is being
monitored.
Note The intercom feature is disabled
when a call is being monitored or
recorded.
For more information, refer to the
Cisco Unified Communications
Manager Features and Services
Guide, “Monitoring and Record-
ing” chapter.
Speed-dialing Dials a specified number that has been
previously stored.
For more information refer to:
• Cisco Unified
Communications Manager
Administration Guide, “Cisco
Unified IP Phone
Configuration” chapter.
• Cisco Unified
Communications Manager
System Guide, “Cisco Unified
IP Phones” chapter.
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description Configuration Reference