Cisco 7961G-GE - IP Phone VoIP

Chapter 5 Configuring Features, Templates, Services, and Users
Telephony Features Available for the Cisco Unified IP Phone
5-24
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.0
OL-11953-01
Time-of-Day
Routing
Restricts access to specified telephony
features by time period.
For more information refer to:
• Cisco Unified
Communications Manager
Administration Guide, “Time
Period Configuration” chapter.
• Cisco Unified
Communications Manager
System Guide, “Time-of-Day
Routing” chapter.
Transfer Allows users to redirect connected calls
from their phones to another number.
Requires no configuration.
Video mode
(SCCP phones
only)
Allows a user to select the video display
mode for viewing a video conference,
depending on the modes configured in the
system.
For more information:
• See the “Configuring Softkey
Templates” section on
page 5-28.
• Refer to Cisco Unified
Communications Manager
Administration Guide,
“Conference Bridge
Configuration” chapter.
• Refer to Cisco Unified
Communications Manager
System Guide,
“Understanding Video
Telephony” chapter.
Table 5-1 Telephony Features for the Cisco Unified IP Phone (continued)
Feature Description Configuration Reference