Cisco 7961G-GE - IP Phone VoIP

1-29
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.0
OL-11953-01
Chapter 1 An Overview of the Cisco Unified IP Phone
Overview of Configuring and Installing Cisco Unified IP Phones
3. Add and configure the phone by
completing these required fields in
the Phone Configuration window:
• Phone type
• Description (user name or ID)
• MAC address
• Device pool
• Partition
• Calling Search Space
• Button template
• Product Specific Configuration
• Softkey template (if customized)
Adds the device with its
default settings to the Cisco
Unified Communications
Manager database.
Refer to
Cisco Communications
Manager Administration
Guide, “Cisco
Unified IP Phone
Configuration” chapter.
For information about Product
Specific Configuration fields,
refer to “?” Button Help in the
Phone Configuration window.
4. Add and configure directory
numbers (lines) on the phone by
completing these required fields in
the Directory Number Configuration
window.
• Directory number(s)
• Partition
• Multiple Calls and Call Waiting
• Call Forwarding and Pickup (if
used)
• Voice Messaging (if used)
Adds primary and secondary
directory numbers and
features associated with
directory numbers to the
phone.
Refer to the
Cisco Communications
Manager Administration
Guide:
• Adding a Directory
Number chapter
• “Creating a Cisco Unity
Voice Mailbox” section
See the “Telephony Features
Available for the Cisco
Unified IP Phone” section on
page 5-2.
Table 1-6 Checklist for Configuring the Cisco
Unified IP Phone 7961G/7961G-GE/7941G/7941G-GE in Cisco
Unified Communications Manager (continued)
Task Purpose For More Information