Cisco 7961G-GE - IP Phone VoIP

Chapter 1 An Overview of the Cisco Unified IP Phone
Overview of Configuring and Installing Cisco Unified IP Phones
1-30
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.0
OL-11953-01
5. Customize softkey templates. Adds, deletes, or changes
order of softkey features that
display on the user’s phone
to meet feature usage needs.
Refer to
Cisco Communications
Manager Administration
Guide,
“Softkey Template
Configuration” chapter.
See the “Configuring Softkey
Templates” section on
page 5-28.
6. Configure speed-dial buttons and
assign speed-dial numbers (optional).
Adds speed-dial buttons and
numbers,
Note Users can change
speed-dial settings
on their phones by
using Cisco
Unified IP Phone
User Options.
Refer to
Cisco Communications
Manager Administration
Guide, “Cisco
Unified IP Phone
Configuration” chapter,
“Configuring Speed-Dial
Buttons” section.
7. Configure Cisco Unified IP Phone
services and assign services (optional).
Provides IP Phone services.
Note Users can add or
change services on
their phones by
using the Cisco
Unified IP Phone
User Options.
Refer to
Cisco Communications
Manager Administration
Guide, “Cisco
Unified IP Phone Services
Configuration” chapter.
See the “Setting Up Services”
section on page 5-29.
Table 1-6 Checklist for Configuring the Cisco
Unified IP Phone 7961G/7961G-GE/7941G/7941G-GE in Cisco
Unified Communications Manager (continued)
Task Purpose For More Information