Cisco 7961G-GE - IP Phone VoIP

1-31
Cisco Unified IP Phone 7961G/7961G-GE and 7941G/7941G-GE for Cisco Unified Communications Manager 6.0
OL-11953-01
Chapter 1 An Overview of the Cisco Unified IP Phone
Overview of Configuring and Installing Cisco Unified IP Phones
8. Assign services to phone buttons
(optional).
Provides single button
access to an IP phone
service or URL.
Refer to
Cisco Communications
Manager Administration
Guide, “Cisco
Unified IP Phone
Configuration” chapter,
“Adding a Cisco
Unified IP Phone Service to a
Phone Button” section.
9. Add user information by configuring
required fields:
• Name (last)
• User ID
• Password (for User Options web
pages)
• PIN (for use with Extension
Mobility and Personal Directory)
Adds user information to the
global directory for Cisco
Unified Communications
Manager.
Refer to
Cisco Communications
Manager Administration
Guide,
“Adding a New User” chapter.
See the “Adding Users to
Cisco
Unified Communications
Manager” section on
page 5-30.
10. Associate a user with a phone
(optional).
Provides users with control
over their phone such as
forwarding calls or adding
speed-dial numbers or
services.
Note Some phones, such
as those in
conference rooms,
do not have an
associated user.
Refer to
Cisco Communications
Manager Administration
Guide,
“Adding a New User” chapter,
“Associating Devices to a
User” section.
Table 1-6 Checklist for Configuring the Cisco
Unified IP Phone 7961G/7961G-GE/7941G/7941G-GE in Cisco
Unified Communications Manager (continued)
Task Purpose For More Information