1-22
Cisco ASA Series CLI Configuration Guide
Chapter 1 Configuring Management Access
Configuring AAA for System Administrators
Limiting User CLI and ASDM Access with Management Authorization
If you configure CLI or enable authentication, you can limit a local user, RADIUS, TACACS+, or LDAP
user (if you map LDAP attributes to RADIUS attributes) from accessing the CLI, ASDM, or the enable
command.
Note Serial access is not included in management authorization, so if you configure the aaa authentication
serial consolecommand, then any user who authenticates can access the console port.
To Next Page
Loading...
