Cisco ASA 5512-X Cli Configuration Guide

1-6
Cisco ASA Series CLI Configuration Guide
Chapter 1 Using the Command-Line Interface
Text Configuration Files
How Commands Correspond with Lines in the Text File
The text configuration file includes lines that correspond with the commands described in this guide.
In examples, commands are preceded by a CLI prompt. The prompt in the following example is
“hostname(config)#”:
hostname(config)# context a
In the text configuration file you are not prompted to enter commands, so the prompt is omitted:
context a
Command-Specific Configuration Mode Commands
Command-specific configuration mode commands appear indented under the main command when
entered at the command line. Your text file lines do not need to be indented, as long as the commands
appear directly following the main command. For example, the following unindented text is read the
same as indented text:
interface gigabitethernet0/0
nameif inside
interface gigabitethernet0/1
nameif outside

Cisco ASA 5512-X Specifications

General

Firewall Throughput	1.2 Gbps
VPN Throughput	200 Mbps
Maximum VPN Peers	250
Integrated IPS	Yes
IPS Throughput	250 Mbps
RAM	4 GB
Power Supply	AC, 100-240V
Security Contexts	2 (Standard), 50 (with Security Contexts license)
Interfaces	6 x Gigabit Ethernet
Dimensions (H x W x D)	1.75 x 17.5 x 14.5 inches
Weight	16 lbs