Cisco ASA 5512-X Cli Configuration Guide

1-2
Cisco ASA Series CLI Configuration Guide
Chapter 1 Configuring AnyConnect Host Scan
Host Scan Packaging
• SCEP authentication
• AnyConnect Telemetry Module
System Requirements
The posture module can be installed on any of these platforms:
• Windows XP (x86 and x86 running on x64)
• Windows Vista (x86 and x86 running on x64)
• Windows 7 (x86 and x86 running on x64)
• Mac OS X 10.5,10.6 (32-bit and 32-bit running on 64-bit)
• Linux (32-bit and 32-bit running on 64-bit)
• Windows Mobile
Licensing
These are the AnyConnect licensing requirements for the posture module:
• AnyConnect Premium for basic Host Scan.
• Advanced Endpoint Assessment license is required for
– Remediation
– Mobile Device Management
Host Scan Packaging
You can load the Host Scan package on to the ASA in one of these ways:
• You can upload it as a standalone package: hostscan-version.pkg
• You can upload it by uploading an AnyConnect Secure Mobility package:
anyconnect-NGC-win-version-k9.pkg
• You can upload it by uploading a Cisco Secure Desktop package: csd_version-k9.pkg
File Description
hostscan-version.pkg This file contains the Host Scan software as well as the Host
Scan library and support charts.
anyconnect-NGC-win-version-k9.pkg This package contains all the Cisco AnyConnect Secure
Mobility Client features including the hostscan-version.pkg
file.
csd_version-k9.pkg This file contains all Cisco Secure Desktop features
including Host Scan software as well as the Host Scan
library and support charts.
This method requires a separate license for Cisco Secure
Desktop.

Cisco ASA 5512-X Specifications

General

Firewall Throughput	1.2 Gbps
VPN Throughput	200 Mbps
Maximum VPN Peers	250
Integrated IPS	Yes
IPS Throughput	250 Mbps
RAM	4 GB
Power Supply	AC, 100-240V
Security Contexts	2 (Standard), 50 (with Security Contexts license)
Interfaces	6 x Gigabit Ethernet
Dimensions (H x W x D)	1.75 x 17.5 x 14.5 inches
Weight	16 lbs