Cisco ASA 5512-X Cli Configuration Guide

1-5
Cisco ASA Series CLI Configuration Guide
Chapter 1 Adding a Standard Access Control List
Feature History for Standard Access Lists
The following example shows how to permit IP traffic through the ASA if conditions are matched:
hostname(config)# access-list 77 standard permit
The following example shows how to specify a destination address:
hostname(config)# access-list 77 standard permit host 10.1.10.123
Feature History for Standard Access Lists
Table 1-2 lists the release history for this feature.
Table 1-2 Feature History for Standard Access Lists
Feature Name Releases Feature Information
Standard access lists 7.0(1) Standard access listsidentify the destination IP addresses of
OSPF routes, which can be used in a route map for OSPF
redistribution.
We introduced the feature and the following command:
access-list standard.

Cisco ASA 5512-X Specifications

General

Firewall Throughput	1.2 Gbps
VPN Throughput	200 Mbps
Maximum VPN Peers	250
Integrated IPS	Yes
IPS Throughput	250 Mbps
RAM	4 GB
Power Supply	AC, 100-240V
Security Contexts	2 (Standard), 50 (with Security Contexts license)
Interfaces	6 x Gigabit Ethernet
Dimensions (H x W x D)	1.75 x 17.5 x 14.5 inches
Weight	16 lbs