Cisco ASA 5512-X Cli Configuration Guide

1-25
Cisco ASA Series CLI Configuration Guide
Chapter 1 Configuring Cisco Intercompany Media Engine Proxy
Configuring Cisco Intercompany Media Engine Proxy
Step 6
hostname(config)# crypto ca authenticate trustpoint
Example:
hostname(config)# crypto ca authenticate
local-ent-ucm
Imports the certificate from local Cisco UCM.
Where trustpoint is the trustpoint for the local Cisco
UCM.
Paste the certificate downloaded from the local
Cisco UCM. This certificate enables the ASA to
validate the certificate that Cisco UCM sends in the
TLS handshake.
Step 7
hostname(config)# tls-proxy proxy_name
hostname(config-tlsp)# server trust-point
proxy_trustpoint
hostname(config-tlsp)# client trust-point
proxy_trustpoint
hostname(config-tlsp)# client cipher-suite
aes128-sha1 aes256-sha1 3des-sha1 null-sha1
Example:
hostname(config)# tls-proxy local_to_remote-ent
hostname(config-tlsp)# server trust-point
local-ent-ucm
hostname(config-tlsp)# client trust-point local-ent
hostname(config-tlsp)# client cipher-suite
aes128-sha1 aes256-sha1 3des-sha1 null-sha1
Updates the TLS proxy for outbound connections.
Where proxy_name is the name you entered in
Step 1 of the task .
Where proxy_trustpoint for the server trust-point
command is the name you entered in Step 4 of this
procedure.
Where proxy_trustpoint for the client trust-point
command is the name you entered in Step 2 of the
task .
Note In this step, you are creating different
trustpoints for the client and the server.
Step 8
hostname(config-tlsp)# exit
Exits from TLS Proxy Configuration mode.
Step 9
hostname(config)# tls-proxy proxy_name
hostname(config-tlsp)# server trust-point
proxy_trustpoint
hostname(config-tlsp)# client trust-point
proxy_trustpoint
hostname(config-tlsp)# client cipher-suite
aes128-sha1 aes256-sha1 3des-sha1 null-sha1
Example:
hostname(config)# tls-proxy remote_to_local-ent
hostname(config-tlsp)# server trust-point local-ent
hostname(config-tlsp)# client trust-point
local-ent-ucm
hostname(config-tlsp)# client cipher-suite
aes128-sha1 aes256-sha1 3des-sha1 null-sha1
Updates the TLS proxy for inbound connections.
Where proxy_name is the name you entered in
Step 5 of the task .
Where proxy_trustpoint for the server trust-point
command is the name you entered in Step 2 of the
task .
Where proxy_trustpoint for the client trust-point
command is the name you entered in Step 4 of this
procedure.
Step 10
hostname(config-tlsp)# exit
Exits from TLS Proxy Configuration mode.
Step 11
hostname(config)# uc-ime uc_ime_name
hostname(config-uc-ime)# ucm address ip_address
trunk-security-mode secure
Example:
hostname(config)# uc-ime local-ent-ime
hostname(config-uc-ime)# ucm address 192.168.10.30
trunk-security-mode secure
Updates the Cisco Intercompany Media Engine
Proxy for trunk-security-mode.
Where
uc_ime_name is the name you entered in
Step 1 of the task .
Only perform this step if you entered nonsecure in
Step 3 of the task .
Commands Purpose

Cisco ASA 5512-X Specifications

General

Firewall Throughput	1.2 Gbps
VPN Throughput	200 Mbps
Maximum VPN Peers	250
Integrated IPS	Yes
IPS Throughput	250 Mbps
RAM	4 GB
Power Supply	AC, 100-240V
Security Contexts	2 (Standard), 50 (with Security Contexts license)
Interfaces	6 x Gigabit Ethernet
Dimensions (H x W x D)	1.75 x 17.5 x 14.5 inches
Weight	16 lbs