Cisco ASA 5512-X Cli Configuration Guide

1-120
Cisco ASA Series CLI Configuration Guide
Chapter 1 Configuring Clientless SSL VPN
Capturing Data
Detailed Steps
Command Purpose
Step 1
capture capture_name type webvpn user
webvpn_username
Starts the capture utility for clientless SSL VPN.
• capture_name is a name you assign to the
capture, which is also prepended to the name of
the capture files.
• webvpn_user is the username to match for
capture.
Step 2
(Optional)
no capture capture_name
Stops the capture utility from capturing packets after
a user has logged in and began a clientless SSL VPN
session.
Step 3
Open a browser and enter the following:
https://asdm_enabled_interface_of_the_security_appli
ance:port/admin/capture/capture_name/pcap
Example:
https://192.0.2.1:60000/admin/capture/hr/pcap
Displays the capture named hr in a sniffer format.
Step 4
Repeat Step 2.

Cisco ASA 5512-X Specifications

General

Firewall Throughput	1.2 Gbps
VPN Throughput	200 Mbps
Maximum VPN Peers	250
Integrated IPS	Yes
IPS Throughput	250 Mbps
RAM	4 GB
Power Supply	AC, 100-240V
Security Contexts	2 (Standard), 50 (with Security Contexts license)
Interfaces	6 x Gigabit Ethernet
Dimensions (H x W x D)	1.75 x 17.5 x 14.5 inches
Weight	16 lbs