1-6
Cisco ASA Series CLI Configuration Guide
Chapter 1 Managing Software and Configurations
Command Purpose
Step 1
more system:running-config
Example:
primary# more system:running-config
(If there is a configuration migration) The output shows the
configuration on the terminal so that you can back up your
configuration. Copy the output from this command, then paste the
configuration in to a text file.
Note If you are upgrading from a pre-8.3 version, then the
running configuration is backed up automatically.
For other methods of backing up, see the configuration guide.
Step 2
copy tftp://server[/path]/asa_image_name
{disk0:/ | disk1:/}[path/]asa_image_name
Example:
primary# copy
tftp://10.1.1.1/asa901-smp-k9.bin
disk0:/asa901-smp-k9.bin
Copies the ASA software to the primary unit flash memory. For
other methods than TFTP, see the copy command.
Step 3
failover exec mate copy /noconfirm
tftp://server[/path]/filename {disk0:/ |
disk1:/}[path/]filename
Example:
primary# failover exec mate copy
/noconfirm
tftp://10.1.1.1/asa901-smp-k9.bin
disk0:/asa901-smp-k9.bin
Copies the software to the secondary unit; be sure to specify the
same path as for the primary unit.
Step 4
copy tftp://server[/path]/asdm_image_name
{disk0:/ | disk1:/}[path/]asdm_image_name
Example:
primary# copy tftp://10.1.1.1/asdm-701.bin
disk0:/asdm-701.bin
Copies the ASDM image to the primary unit flash memory.
Step 5
failover exec mate copy /noconfirm
tftp://server[/path]/asdm_image_name
{disk0:/ | disk1:/}[path/]asdm_image_name
Example:
primary# failover exec mate copy
/noconfirm tftp://10.1.1.1/asdm-701.bin
disk0:/asdm-701.bin
Copies the ASDM image to the secondary unit; be sure to specify
the same path as for the active unit.
Step 6
failover active group 1
failover active group 2
Example:
primary# failover active group 1
primary# failover active group 2
Makes both failover groups active on the primary unit.
Step 7
configure terminal
Example:
primary(config)# configure terminal
If you are not already in global configuration mode, accesses
global configuration mode.
To Next Page
Loading...
Need help?
General
