Cisco ASA 5512-X Cli Configuration Guide

1-39
Cisco ASA Series CLI Configuration Guide
Appendix 1 Configuring an External Server for Authorization and Authentication
Configuring an External TACACS+ Server
.
Table 1-11 Supported TACACS+ Accounting Attributes
Attribute Description
bytes_in Specifies the number of input bytes transferred during this connection (stop
records only).
bytes_out Specifies the number of output bytes transferred during this connection (stop
records only).
cmd Defines the command executed (command accounting only).
disc-cause Indicates the numeric code that identifies the reason for disconnecting (stop
records only).
elapsed_time Defines the elapsed time in seconds for the connection (stop records only).
foreign_ip Specifies the IP address of the client for tunnel connections. Defines the address
on the lowest security interface for cut-through-proxy connections.
local_ip Specifies the IP address that the client connected to for tunnel connections. Defines
the address on the highest security interface for cut-through-proxy connections.
NAS port Contains a session ID for the connection.
packs_in Specifies the number of input packets transferred during this connection.
packs_out Specifies the number of output packets transferred during this connection.
priv-level Set to the user privilege level for command accounting requests or to 1 otherwise.
rem_iddr Indicates the IP address of the client.
service Specifies the service used. Always set to “shell” for command accounting only.
task_id Specifies a unique task ID for the accounting transaction.
username Indicates the name of the user.

Cisco ASA 5512-X Specifications

General

Firewall Throughput	1.2 Gbps
VPN Throughput	200 Mbps
Maximum VPN Peers	250
Integrated IPS	Yes
IPS Throughput	250 Mbps
RAM	4 GB
Power Supply	AC, 100-240V
Security Contexts	2 (Standard), 50 (with Security Contexts license)
Interfaces	6 x Gigabit Ethernet
Dimensions (H x W x D)	1.75 x 17.5 x 14.5 inches
Weight	16 lbs