Cisco ASA 5512-X Cli Configuration Guide

1-37
Cisco ASA Series CLI Configuration Guide
Chapter 1 Starting Interface Configuration (ASA 5510 and Higher)
Feature History for ASA 5510 and Higher Interfaces
Support for Pause Frames for Flow Control on
the ASA 5580 10-Gigabit Ethernet Interfaces
8.2(2) You can now enable pause (XOFF) frames for flow control.
This feature is also supported on the ASA 5585-X.
We introduced the following command: flowcontrol.
Support for Pause Frames for Flow Control on
1-Gigabit Ethernet Interfaces
8.2(5)/8.4(2) You can now enable pause (XOFF) frames for flow control
for 1-Gigabit interfaces on all models.
We modified the following command: flowcontrol.
EtherChannel support 8.4(1) You can configure up to 48 802.3ad EtherChannels of eight
active interfaces each.
We introduced the following commands: channel-group,
lacp port-priority, interface port-channel, lacp
max-bundle, port-channel min-bundle, port-channel
load-balance, lacp system-priority, clear lacp counters,
show lacp, show port-channel.
Note EtherChannel is not supported on the ASA 5505.
Table 1-3 Feature History for Interfaces (continued)
Feature Name Releases Feature Information

Cisco ASA 5512-X Specifications

General

Firewall Throughput	1.2 Gbps
VPN Throughput	200 Mbps
Maximum VPN Peers	250
Integrated IPS	Yes
IPS Throughput	250 Mbps
RAM	4 GB
Power Supply	AC, 100-240V
Security Contexts	2 (Standard), 50 (with Security Contexts license)
Interfaces	6 x Gigabit Ethernet
Dimensions (H x W x D)	1.75 x 17.5 x 14.5 inches
Weight	16 lbs