Cisco ASA 5512-X Cli Configuration Guide

Index
IN-19
Cisco ASA Series CLI Configuration Guide
MPLS
LDP
41-6
router-id 41-6
TDP 41-6
MRoute pane
description
30-5
MSFC
overview
1-16
MSIE client parameters, configuring 70-59
MTU 12-12, 13-14
MTU size, Easy VPN client, ASA 5505 74-5
multicast traffic 4-3
multiple context mode
logging
80-2
See security contexts
multi-session PAT
33-16
N
NAC
See Network Admission Control
naming an interface
other models
12-8, 13-10, 13-11
NAT
about
32-1
bidirectional initiation 32-2
disabling proxy ARP for global addresses 24-11
DNS 32-27
dynamic
about
32-7
dynamic NAT
network object NAT
33-5
twice NAT 34-7
dynamic PAT
about
32-8
network object NAT 33-7
twice NAT 34-11
identity
about
32-10
identity NAT
network object NAT
33-14
twice NAT 34-21
implementation 32-13
interfaces 32-19
mapped address guidelines 32-19
network object
comparison with twice NAT
32-13
network object NAT
about
32-14
configuring 33-1
dynamic NAT 33-5
dynamic PAT 33-7
examples 33-18
guidelines 33-2
identity NAT 33-14
monitoring 33-17
prerequisites 33-2
static NAT 33-11
no proxy ARP 33-15, 34-20
object
extended PAT
33-7
flat range for PAT 33-7
routed mode 32-11
route lookup 33-15, 34-24
RPC not supported with 48-3
rule order 32-18
static
about
32-3
few-to-many mapping 32-6
many-to-few mapping 32-5, 32-6
one-to-many 32-5
static NAT
network object NAT
33-11
twice NAT 34-18
static with port translation
about
32-4
terminology 32-2
transparent mode 32-11

Cisco ASA 5512-X Specifications

General

Firewall Throughput	1.2 Gbps
VPN Throughput	200 Mbps
Maximum VPN Peers	250
Integrated IPS	Yes
IPS Throughput	250 Mbps
RAM	4 GB
Power Supply	AC, 100-240V
Security Contexts	2 (Standard), 50 (with Security Contexts license)
Interfaces	6 x Gigabit Ethernet
Dimensions (H x W x D)	1.75 x 17.5 x 14.5 inches
Weight	16 lbs