Cisco ASA 5512-X Cli Configuration Guide

1-17
Cisco ASA Series CLI Configuration Guide
Chapter 1 Introduction to the Cisco ASA
New Features
NAT support for IPv6 NAT now supports IPv6 traffic, as well as translating between IPv4 and IPv6
(NAT64). Translating between IPv4 and IPv6 is not supported in transparent
mode.
We modified the following commands: nat (in global and object network
configuration mode), show conn, show nat, show nat pool, show xlate.
We modified the following screens:
Configuration > Firewall > Objects > Network Objects/Group
Configuration > Firewall > NAT Rules
DHCPv6 relay DHCP relay is supported for IPv6.
We introduced the following commands: ipv6 dhcprelay server, ipv6
dhcprelay enable, ipv6 dhcprelay timeout, clear config ipv6 dhcprelay,
ipv6 nd managed-config-flag, ipv6 nd other-config-flag, debug ipv6 dhcp,
debug ipv6 dhcprelay, show ipv6 dhcprelay binding, clear ipv6 dhcprelay
binding, show ipv6 dhcprelay statistics, and clear ipv6 dhcprelay statistics.
We modified the following screen: Configuration > Device Management >
DHCP > DHCP Relay.
Table 1-5 New Features for ASA Version 9.0(1)/ASDM Version 7.0(1) (continued)
Feature Description

Cisco ASA 5512-X Specifications

General

Firewall Throughput	1.2 Gbps
VPN Throughput	200 Mbps
Maximum VPN Peers	250
Integrated IPS	Yes
IPS Throughput	250 Mbps
RAM	4 GB
Power Supply	AC, 100-240V
Security Contexts	2 (Standard), 50 (with Security Contexts license)
Interfaces	6 x Gigabit Ethernet
Dimensions (H x W x D)	1.75 x 17.5 x 14.5 inches
Weight	16 lbs