Cisco ASR 5000 Series

PDG/TTG Thresholds
▀ Configuring PDG/TTG Thresholds
▄ Cisco ASR 5000 Series Thresholding Configuration Guide
100
OL-25552-02
Configuring PDG/TTG Thresholds
Use the following configuration example to enable, disable and configure PDG/TTG threshold monitoring.
configure
[ no | default ] threshold monitoring pdg-service
[ default ] threshold pdg-current-sessions <high_thresh> [ clear <low_thresh> ]
[ default ] threshold poll pdg-current-sessions interval <time>
[ default ] threshold pdg-current-active-sessions <high_thresh> [ clear <low_thresh>
]
[ default ] threshold poll pdg-current-active-sessions interval <time>
end