Cisco ASR 5000 Series Thresholding Configuration Guide

CPU Resource Thresholds
10-second Average of Total Processing Card CPU Utilization Thresholds ▀
Cisco ASR 5000 Series Thresholding Configuration Guide ▄
OL-25552-02
47
10-second Average of Total Processing Card CPU Utilization
Thresholds
10-second average of total CPU utilization thresholds generate alerts or alarms based on a 10 second average of cpu
utilization for all processing card CPUs during the specified polling interval.
Alerts or alarms are triggered for 10-second average of total CPU utilization based on the following rules:
Enter condition: Average measured amount of total CPU utilization for the last 10 seconds > or = High
Threshold
Clear condition: Average measured amount of total CPU utilization for the last 10 seconds < Low Threshold
If a trigger condition occurs within the polling interval, the alert or alarm will not be generated until the end of the
polling interval.
Configuring 10-second Average of Processing Card CPU Thresholds
Use the following example for configuring 10-second average of total CPU utilization thresholding.
configure
threshold 10sec-cpu-utilization <high_thresh> [ clear <low_thresh> ]
threshold poll 10sec-cpu-utilization interval <time>
threshold monitoring cpu-resource
end

Cisco ASR 5000 Series Specifications

General

Brand	Cisco
Model	ASR 5000 Series
Category	Network Router
Language	English