Cisco ASR 5000 Series Thresholding Configuration Guide

PDSN Service Thresholds
▀ PDSN Service-Level PDSN Service Thresholds
▄ Cisco ASR 5000 Series Thresholding Configuration Guide
110
OL-25552-02
PDSN Service-Level PDSN Service Thresholds
PDSN services send and receive A11 registration messages and PPP packets. The thresholds in the PDSN Service-Level
can be configured to monitor thresholds for A11 registration response failures, discarded A11 registration requests,
discarded A11 registration acknowledgments, and discarded PPP send packets for individual PDSN services.
There are five thresholds that can be configured for the PDSN service-level:
Average Calls Setup Per Second
Total A11 Registration Response Failures
Total A11 Registration Request Messages Discarded
Total A11 Registration Acknowledgement Messages Discarded
Total Packets PPP Protocol Processing Layer Discarded on Transmit
Configuring PDSN Service-Level PDSN Service Thresholds
Use the following example to configure and enable these thresholds:
configuration
context <context_name>
pdsn-service <name>
threshold init-rrq-rcvd-rate <high_thresh> [ clear <low_thresh>]
threshold a11-rrp-failure <high_thresh> [ clear <low_thresh>]
threshold a11-rrq-msg-discard <high_thresh> [ clear <low_thresh>]
threshold a11-rac-msg-discard <high_thresh> [ clear <low_thresh>]
threshold all-ppp-send-discard <high_thresh> [ clear <low_thresh>]
exit
exit
threshold poll pdsn-init-rrq-rcvd-rate interval <time>
threshold poll a11-rrp-failure interval <time>
threshold poll a11-rrq-msg-discard interval <time>
threshold poll a11-rac-msg-discard interval <time>
threshold poll a11-ppp-send-discard interval <time>
threshold monitoring pdsn-service
end

Cisco ASR 5000 Series Specifications

General

Brand	Cisco
Model	ASR 5000 Series
Category	Network Router
Language	English