Cisco ASR 5000 Series

Total Session Thresholds
▀ Total SGSN PDP Contexts Thresholds
▄ Cisco ASR 5000 Series Thresholding Configuration Guide
158
OL-25552-02
Total SGSN PDP Contexts Thresholds
Total SGSN PDP contexts thresholds generate alerts or alarms based on the total number of PDP contexts facilitated by
all SGSN services configured on the system during the specified polling interval.
Alerts or alarms are triggered for the total of all SGSN PDP contexts based on the following rules:
Enter condition: Actual total number of PDP contexts > or = High Threshold
Clear condition: Actual total number of PDP contexts < Low Threshold
If a trigger condition occurs within the polling interval, the alert or alarm will not be generated until the end of the
polling interval.
Configuring Total SGSN PDP Context Thresholds
Use the following example to configure the per-SGSN service thresholds:
configure
threshold total-sgsn-pdp-sessions <high_thresh> [ clear <low_thresh>]
threshold poll total-sgsn-pdp-sessions interval <time>
end