Cisco ASR 5000 Series Thresholding Configuration Guide ▄
Chapter 25
Total Session Thresholds
Threshold monitoring can be enabled for the total session counts described in the following table.
To configure, go to
section:
Enables the generation of alerts or alarms based on the total number of sessions (active
and dormant) facilitated by all PDSN services counted during the polling interval.
Total PDSN Session
Thresholds
Enables the generation of alerts or alarms based on the total number of PDP contexts
(active and dormant) facilitated by all GGSN services counted during the polling
interval.
Total GGSN Session
Thresholds
Enables the generation of alerts or alarms based on the total number of GPRS sessions or
the total number of PDP sessions facilitated by the GPRS services counted during the
polling interval.
Total GPRS Session
Thresholds
Total GPRS PDP
Contexts Thresholds
Enables the generation of alerts or alarms based on the total number of sessions (active
and dormant) facilitated by all HA services counted during the polling interval.
Total HA Session
Thresholds
Enables the generation of alerts or alarms based on the total number of HNB, UE, Iu
sessions (active and dormant) facilitated by all HNB-GW services counted during the
polling interval.
Total HNB-GW
Session Thresholds
Enables the generation of alerts or alarms based on the total number of sessions (active
and dormant) facilitated by all HSGW services counted during the polling interval.
Total HSGW Session
Thresholds
Enables the generation of alerts or alarms based on the total number of sessions (active
and dormant) facilitated by all LMA services counted during the polling interval.
Total LMA Session
Thresholds
Enables the generation of alerts or alarms based on the total number of sessions
facilitated by all LNS services counted during the polling interval.
Total LNS Session
Thresholds
Enables the generation of alerts or alarms based on the total number of sessions (active
and dormant) facilitated by all MME services counted during the polling interval.
Total MME Session
Thresholds
Enables the generation of alerts or alarms based on the total number of sessions (active
and dormant) facilitated by all P-GW services counted during the polling interval.
Total P-GW Session
Thresholds
Enables the generation of alerts or alarms based on the total number of SGSN sessions or
the total number of PDP sessions facilitated by the SGSN services counted during the
polling interval.
Total SGSN Session
Thresholds
Total SGSN PDP
Contexts Thresholds
Enables the generation of alerts or alarms based on the total number of sessions (active
and dormant) facilitated by all S-GW services counted during the polling interval.
Total S-GW Session
Thresholds