Cisco ASR 5000 Series Thresholding Configuration Guide

Port Utilization Thresholds
▀ Transmit Port Utilization Thresholds
▄ Cisco ASR 5000 Series Thresholding Configuration Guide
126
OL-25552-02
Transmit Port Utilization Thresholds
Transmit port utilization thresholds generate alerts or alarms based on the utilization percentage of each configured port
in relation to data transmitted during the specified polling interval. This threshold is configured on a per-port basis.
Alerts or alarms are triggered for transmit port utilization based on the following rules:
Enter condition: Actual percent utilization of a port for transmit data > or = High Threshold
Clear condition: Actual percent utilization of a port for transmit data < Low Threshold
If a trigger condition occurs within the polling interval, the alert or alarm will not be generated until the end of the
polling interval.
Configuring Transmit Port Utilization Thresholds
Use the following example to configure the polling interval over which to measure transmit port utilization:
configure
threshold poll port-tx-utilization interval <seconds>
port <port-type> <slot#/port#>
threshold tx-utilization <high_thresh_%> [ clear <low_thresh_%> ]
threshold monitoring
end

Cisco ASR 5000 Series Specifications

General

Brand	Cisco
Model	ASR 5000 Series
Category	Network Router
Language	English