▀ AAA Authentication Failure Rate Thresholds
▄ Cisco ASR 5000 Series Thresholding Configuration Guide
AAA Authentication Failure Rate Thresholds
Authentication failure rate thresholds generate alerts or alarms based on the percentage of AAA authentication message
requests that failed during the specified polling interval. Authentication requests are counted for all AAA authentication
servers that the system is configured to communicate with.
Alerts or alarms are triggered for authentication failure rates based on the following rules:
Enter condition: Actual failure percentage > or = High Threshold
Clear condition: Actual failure percentage < Low Threshold
If a trigger condition occurs within the polling interval, the alert or alarm will not be generated until the end of the
polling interval.
Configuring AAA Authentication Failure Rate Threshold
Use the following example for configuring AAA authentication failure rate threshold:
configure
threshold aaa-auth-failure-rate <high_thresh>[ clear <low_thresh> ]
threshold poll aaa-auth-failure-rate interval <time>
threshold monitoring aaa-auth-failure
end
To Next Page
Loading...
