Cisco ASR 5000 Series Thresholding Configuration Guide

Total Session Thresholds
▀ Total GPRS PDP Contexts Thresholds
▄ Cisco ASR 5000 Series Thresholding Configuration Guide
148
OL-25552-02
Total GPRS PDP Contexts Thresholds
Total GPRS PDP contexts thresholds generate alerts or alarms based on the total number of PDP contexts facilitated by
all GPRS services configured on the system during the specified polling interval.
Alerts or alarms are triggered for the total of all GPRS PDP contexts based on the following rules:
Enter condition: Actual total number of PDP contexts > or = High Threshold
Clear condition: Actual total number of PDP contexts < Low Threshold
If a trigger condition occurs within the polling interval, the alert or alarm will not be generated until the end of the
polling interval.
Configuring Total GPRS PDP Context Thresholds
Use the following example to configure the per-GPRS service thresholds:
configure
threshold total-gprs-pdp-sessions <high_thresh> [ clear <low_thresh>]
threshold poll total-gprs-pdp-sessions interval <time>
end

Cisco ASR 5000 Series Specifications

General

Brand	Cisco
Model	ASR 5000 Series
Category	Network Router
Language	English