Cisco ASR 5000 Series Thresholding Configuration Guide

Cisco ASR 5000 Series Thresholding Configuration Guide ▄
OL-25552-02
113
Chapter 19
Per-service Session Thresholds
Threshold monitoring can be enabled for the per-service session counts described in the following table.
Value
Description
To configure, go to
section:
PDSN
Services
Enables the generation of alerts or alarms based on the number of sessions (active and
dormant) facilitated by any PDSN service counted during the polling interval.
Per-PDSN Service
Thresholds
HA
Services
Enables the generation of alerts or alarms based on the number of sessions (active and
dormant) facilitated by any HA service counted during the polling interval.
Per-HA Service
Thresholds
GGSN
Services
Enables the generation of alerts or alarms based on the number of PDP contexts (active
and dormant) facilitated by any GGSN service counted during the polling interval.
Per-GGSN Service
Thresholds
LNS
Services
Enables the generation of alerts or alarms based on the number of sessions facilitated by
any LNS service counted during the polling interval.
Per-LNS Service
Thresholds
GPRS
Services
Enables the generation of alerts or alarms based on the number of GPRS sessions or the
number of r GPRS PDP contexts (active and dormant) facilitated by any GPRS service
counted during the polling interval.
Per-GPRS Service
Thresholds
Per-GPRS Service PDP
Contexts Thresholds
SGSN
Services
Enables the generation of alerts or alarms based on the number of SGSN sessions or the
number of SGSN PDP contexts (active and dormant) facilitated by any SGSN service
counted during the polling interval.
Per-SGSN Service
Thresholds
Per-SGSN Service PDP
Contexts Thresholds

Cisco ASR 5000 Series Specifications

General

Brand	Cisco
Model	ASR 5000 Series
Category	Network Router
Language	English