Cisco ASR 5000 Series Thresholding Configuration Guide

ASN GW Service Thresholds
System-Level ASN GW Service Thresholds ▀
Cisco ASR 5000 Series Thresholding Configuration Guide ▄
OL-25552-02
31
System-Level ASN GW Service Thresholds
The system-level thresholds for ASN GW Service-Level can be configured to monitor thresholds for subscriber network
entry, authentication, session registration response failures, discarded registration requests, session timeout, and hand-
off denials for individual ASN GW services.
Following thresholds can be configured for the ASN GW service-level:
Number of ASN GW Authentication failures
Number of ASN GW hand-off denials
Maximum number of EAP retries
Number of network entry denials
Number of Network Access Identifier (NAI) in R6 message
ASN GW timeout duration during session setup
ASN GW session timeout duration
Configuring System-level ASN GW Service Thresholds
Use the following example to configure and enable these thresholds:
configuration
threshold asngw-auth-failure <high_thresh> [clear <low_thresh>]
threshold asngw-handoff-denial <high_thresh> [clear <low_thresh>]
threshold asngw-max-eap-retry <high_thresh> [clear <low_thresh>]
threshold asngw-network-entry-denial <high_thresh> [clear <low_thresh>]
threshold asngw-r6-invalid-nai <high_thresh> [clear <low_thresh>]
threshold asngw-session-setup-timeout <high_thresh> [clear <low_thresh>]
threshold asngw-session-timeout <high_thresh> [clear <low_thresh>]
threshold poll asngw-auth-failure interval <time>
threshold poll asngw-handoff-denial interval <time>
threshold poll asngw-max-eap-retry interval <time>
threshold poll asngw-network-entry-denial interval <time>
threshold poll asngw-r6-invalid-nai interval <time>
threshold poll asngw-session-setup-timeout interval <time>
threshold poll asngw-session-timeout interval <time>

Cisco ASR 5000 Series Specifications

General

Brand	Cisco
Model	ASR 5000 Series
Category	Network Router
Language	English