Cisco ASR 5000 Series

Cisco ASR 5000 Series Thresholding Configuration Guide ▄
OL-25552-02
141
Chapter 24
System Management Card CompactFlash Memory
Thresholds
System management card CompactFlash memory utilization thresholds generate alerts or alarms based on the
percentage of memory used for the CompactFlash during the polling interval. A single threshold enables memory
utilization monitoring for both the active and standby system management cards allowing for alerts or alarms to be
generated for each CompactFlash.
Alerts or alarms are triggered for CompactFlash memory utilization based on the following rules:
Enter condition: Actual percentage memory utilization > or = High Threshold
Clear condition: Actual percentage memory utilization < Low Threshold
If a trigger condition occurs within the polling interval, the alert or alarm will not be generated until the end of the
polling interval.