Cisco ASR 5000 Series Thresholding Configuration Guide

Total Session Thresholds
Total PDSN Session Thresholds ▀
Cisco ASR 5000 Series Thresholding Configuration Guide ▄
OL-25552-02
145
Total PDSN Session Thresholds
Total PDSN session thresholds generate alerts or alarms based on the total number of sessions facilitated by any PDSN
service configured on the system during the specified polling interval.
Alerts or alarms are triggered for the total of all PDSN sessions based on the following rules:
Enter condition: Actual total number of sessions > or = High Threshold
Clear condition: Actual total number of sessions < Low Threshold
If a trigger condition occurs within the polling interval, the alert or alarm will not be generated until the end of the
polling interval.
Configuring Total PDSN Session Thresholds
Use the following example to configure the total PDSN session thresholds:
configure
threshold total-pdsn-sessions <high_thresh> [ clear <low_thresh> ]
threshold poll total-pdsn-sessions interval <time>
threshold monitoring subscriber
end

Cisco ASR 5000 Series Specifications

General

Brand	Cisco
Model	ASR 5000 Series
Category	Network Router
Language	English