Cisco ASR 5000 Series Thresholding Configuration Guide

Cisco ASR 5000 Series Thresholding Configuration Guide ▄
OL-25552-02
63
Chapter 8
Diameter Thresholds
Threshold monitoring can be enabled for the Diameter-related values described in the following table.
Threshold
Description
To configure, go to
section:
DCCA Bad
Answers
Enables generation of alerts or alarms based on the number of times DIAMETER-
BAD-ANSWER code is sent to the Diameter server during a polling interval.
DCCA Bad Answers
Threshold
DCCA Protocol
Errors
Enables generation of alerts or alarms based on the number protocol error messages
received from the Diameter server during a polling interval.
DCCA Protocol
Errors Threshold
DCCA Rating
Failure
Enables generation of alerts or alarms based on the number of times the Diameter
server rejected requests for a block of credits, due to the Rating Group (content-id)
being invalid during a polling interval.
DCCA Rating Failure
Threshold
DCCA Unknown
Rating Group
Enables generation of alerts or alarms based on the number of times the block of
credits returned by the Diameter server is rejected due to the Rating Group being
unknown during a polling interval.
DCCA Unknown
Rating Group
Threshold
Diameter Retry
Rate
Enables generation of alerts or alarms based on the percentage of Diameter requests
that were re-tried during a polling interval.
Diameter Retry Rate
Threshold

Cisco ASR 5000 Series Specifications

General

Brand	Cisco
Model	ASR 5000 Series
Category	Network Router
Language	English