▀ AAA Accounting Failure Rate Thresholds
▄ Cisco ASR 5000 Series Thresholding Configuration Guide
AAA Accounting Failure Rate Thresholds
Accounting failure rate thresholds generate alerts or alarms based on the percentage of AAA accounting message
requests that failed during the specified polling interval. Accounting requests are counted for all AAA accounting
servers that the system is configured to communicate with.
Alerts or alarms are triggered for accounting failure rates based on the following rules:
Enter condition: Actual number of failures > or = High Threshold
Clear condition: Actual number of failures < Low Threshold
If a trigger condition occurs within the polling interval, the alert or alarm will not be generated until the end of the
polling interval.
Configuring AAA Accounting Failure Rate Threshold
Use the following example to configure AAA accounting failure rate threshold:
configure
threshold aaa-acct-failure-rate <high_thresh>[ clear <low_thresh> ]
threshold poll aaa-acct-failure-rate interval <time>
threshold monitoring aaa-acct-failure
end
To Next Page
Loading...
