Cisco ASR 5000 Series

Per-service Session Thresholds
▀ Per-SGSN Service PDP Contexts Thresholds
▄ Cisco ASR 5000 Series Thresholding Configuration Guide
122
OL-25552-02
Per-SGSN Service PDP Contexts Thresholds
Per-SGSN service PDP context thresholds generate alerts or alarms based on the total number of PDP contexts
facilitated by any SGSN service session configured on the system during the specified polling interval.
Alerts or alarms are triggered for sessions per-SGSN service based on the following rules:
Enter condition: Actual total number of PDP contexts > or = High Threshold
Clear condition: Actual total number of PDP contexts < Low Threshold
If a trigger condition occurs within the polling interval, the alert or alarm will not be generated until the end of the
polling interval.
Configuring Per-SGSN Service PDP Contexts Thresholds
Use the following example to configure the per-SGSN service PDP contexts thresholds:
configure
threshold per-service-sgsn-pdp-sessions <high_thresh> [ clear<low_thresh> ]
threshold poll per-service-sgsn-pdp sessions interval <time>
threshold monitoring subscriber
end