Cisco ASR 5000 Series Thresholding Configuration Guide

Thresholding Overview
▀ Additional Information
▄ Cisco ASR 5000 Series Thresholding Configuration Guide
16
OL-25552-02
Important: Note that for certain values, the alert or alarm serves to warn of low quantities (i.e. memory, session
licenses, etc.). In these cases, the low threshold is the condition that must be met or exceeded within the polling interval
to generate the alert or alarm. Once the high threshold is exceeded during an interval, the low quantity condition is
cleared.
Thresholding functionality on the system can be configured to monitor the following values:
AAA:
Archive size
Number of authentication failures
Authentication failure rate
Number of accounting failures
Accounting failure rate
Retry rate
AAA Manager request queue usage
ASN GW Service:
Number of ASN GW Authentication failures
Number of ASN GW hand-off denials
Maximum number of EAP retries
Number of network entry denials
Number of Network Access Identifier (NAI) in R6 message
ASN GW timeout duration during session setup
ASN GW session timeout duration
FA Service registration reply errors
HA Service:
Call setup rate
Registration Reply, Re-registration Reply, and De-registration Reply errors
HNB-GW Service Sessions:
Total HNB Sessions
Total UE Sessions
Total Iu Sessions
PDSN Service:
Call setup rate
A11 Messages failed and discarded
PPP send packets discarded
Call setup:
Number of calls setup
Number of call setup failures
RP setup failure rate

Cisco ASR 5000 Series Specifications

General

Brand	Cisco
Model	ASR 5000 Series
Category	Network Router
Language	English