Cisco ASR 5000 Series - Page 93

Network Address Translation Thresholds
Configuring NAT Thresholds ▀
Cisco ASR 5000 Series Thresholding Configuration Guide ▄
OL-25552-02
93
ip-pool-release <high_thresh> [ clear <low_thresh> ]
ip-pool-used <high_thresh> [ clear <low_thresh> ]
exit
threshold nat-port-chunks-usage <high_thresh> clear <low_thresh>
end
Notes:
Thresholds configured using the threshold ip-pool-* commands in the Context Configuration Mode apply
to all IP pools in the context
Thresholds configured using the alert-threshold keyword are specific to the pool that they are configured
in, and will take priority, i.e. will override the context-wide configuration mentioned above.