Cisco ASR 9000 Serie

PurposeCommand or Action
Sets the time that the IP SLA operation waits for a response
from its request packet.
timeout milliseconds
Example:
RP/0/RSP0/CPU0:router(config-ipsla-icmp-echo)#
timeout 10000
Step 9
•
Use the milliseconds argument to specify the number of
milliseconds that the operation waits to receive a response.
(Optional) Creates a user-specified identifier for an IP SLA
operation.
tag text
Example:
RP/0/RSP0/CPU0:router(config-ipsla-icmp-echo)#
tag ipsla
Step 10
Exits IP SLA operation configuration mode and IP SLA
configuration mode. Returns to global configuration mode.
exit
Example:
RP/0/RSP0/CPU0:router(config-ipsla-icmp-echo)#
Step 11
exit
RP/0/RSP0/CPU0:router(config-ipsla-op)# exit
RP/0/RSP0/CPU0:router(config-ipsla)# exit
RP/0/RSP0/CPU0:router(config)#
Schedules the start time of the operation. You can configure a
basic schedule.
ipsla schedule operation op-num
Example:
RP/0/RSP0/CPU0:router(config)# ipsla schedule
Step 12
operation 432
RP/0/RSP0/CPU0:router(config-ipsla-sched)#
The forever keyword schedules the operation to run
indefinitely. The seconds argument schedules the lifetime of
life {forever | seconds}
Example:
RP/0/RSP0/CPU0:router(config-ipsla-sched)# life
30
Step 13
the operation, in seconds. The default lifetime of an operation
is 3600 seconds (one hour).
(Optional) Specifies the number of seconds to keep the
operation in memory when it is not actively collecting
ageout seconds
Example:
RP/0/RSP0/CPU0:router(config-ipsla-sched)#
ageout 3600
Step 14
information. The default value of 0 seconds means that the
operation never times out.
(Optional) Specifies that the operation starts automatically at
the specified time and for the specified duration every day.
recurring
Example:
RP/0/RSP0/CPU0:router(config-ipsla-sched)#
recurring
Step 15
Specifies a time for the operation to start. The following
keywords are described:
start-time [hh:mm:ss {day | month day} | now |
pending | after hh:mm:ss]
Step 16
Cisco ASR 9000 Series Aggregation Services Router System Monitoring Configuration Guide, Release 4.2.x
231
Implementing IP Service Level Agreements
Configuring an ICMP Echo Operation