Cisco ASR 9000 Serie

Table 38: BGP Entity Instance Monitoring
Command DescriptionEntity
Use the performance-mgmt apply monitor bgp command in global
configuration mode to enable entity instance monitoring for a BGP entity
instance.
Syntax:
performance-mgmt
apply monitor
bgp
ip-address
template-name | default}
RP/0/RSP0/CPU0:router(config)# performance-mgmt apply monitor
bgp 10.12.0.4 default
BGP
This table describes the commands used to enable entity instance monitoring for the interface entity instances.
Table 39: Interface Entity Instance Monitoring
Command DescriptionsEntity
Use the performance-mgmt apply monitor data-rates command in
global configuration mode to enable entity instance monitoring for an
interface data rates entity instance.
Syntax:
performance-mgmt
apply
monitor
interface
data-rates
type
interface-path-id {template-name |
default}
RP/0/RSP0/CPU0:router(config)# performance-mgmt apply monitor
interface data-rates gigabitethernet 0/2/0/0 default
Interface Data Rates
Cisco ASR 9000 Series Aggregation Services Router System Monitoring Configuration Guide, Release 4.2.x
334
Implementing Performance Management
PM Entity Instance Monitoring Overview