Cisco ASR 9000 Serie

Command DescriptionsEntity
Use the performance-mgmt apply monitor interface basic-counters
command in global configuration mode to enable entity instance monitoring
for an interface basic counters entity instance.
Syntax:
performance-mgmt
apply
monitor
interface
basic-counters
type
interface-path-id {template-name |
default}
RP/0/RSP0/CPU0:router(config)# performance-mgmt apply monitor
interface basic-counters gigabitethernet 0/2/0/0 default
Interface Basic Counters
Use the performance-mgmt apply monitor interface generic-counters
command in global configuration mode to enable entity instance monitoring
for an interface generic counters entity instance.
Syntax:
performance-mgmt
apply
monitor
interface
generic-counters
type
interface-path-id {template-name |
default}
RP/0/RSP0/CPU0:router(config)# performance-mgmt apply monitor
interface generic-counters gigabitethernet 0/2/0/0 default
Interface Generic Counters
This table describes the command used to enable entity instance monitoring for the MPLS entity instances.
Table 40: MPLS Entity Instance Monitoring
Command DescriptionsEntity
Use the performance-mgmt apply monitor mpls ldp command in global
configuration mode to enable entity instance monitoring for an MPLS LDP
entity instance.
Syntax:
performance-mgmt
apply monitor
mpls
ldp
ip-address {template-name |
default}
RP/0/RSP0/CPU0:router(config)# performance-mgmt apply monitor
mpls ldp 10.34.64.154 default
MPLS LDP
Cisco ASR 9000 Series Aggregation Services Router System Monitoring Configuration Guide, Release 4.2.x
335
Implementing Performance Management
PM Entity Instance Monitoring Overview