Cisco ASR 9000 Serie

This table describes the commands used to enable entity instance monitoring for the Node entity instances.
Table 41: Node Entity Instance Monitoring
Command DescriptionsEntity
Use the performance-mgmt apply monitor node cpu command in global
configuration mode to enable entity instance monitoring for a node CPU
entity instance.
Syntax:
performance-mgmt
apply
monitor
node
cpu
location
node-id {template-name |
default}
RP/0/RSP0/CPU0:router(config)# performance-mgmt apply monitor
node cpu location 0/RP1/CPU0 default
Node CPU
Use the performance-mgmt apply monitor node memory command
in global configuration mode to enable an entity instance monitoring for
a node memory entity instance.
Syntax:
performance-mgmt
apply
monitor
node
memory
location
node-id {template-name |
default}
RP/0/RSP0/CPU0:router(config)# performance-mgmt apply monitor
node memory location 0/RP1/CPU0 default
Node Memory
Use the performance-mgmt apply monitor node process command in
global configuration mode to enable an entity instance monitoring collection
for a node process entity instance.
Syntax:
performance-mgmt
apply monitor node
process
location
node-id
pid {template-name | default}
RP/0/RSP0/CPU0:router(config)# performance-mgmt apply monitor
node process location p 0/RP1/CPU0 275 default
Node Process
Cisco ASR 9000 Series Aggregation Services Router System Monitoring Configuration Guide, Release 4.2.x
336
Implementing Performance Management
PM Entity Instance Monitoring Overview