Cisco ASR 901 - Ptp Profile Telecom

1-107
Cisco ASR 901 Aggregation Services Router Command Reference Guide
OL-26031-07
Chapter 1 CLI Command Reference
ptp profile telecom
ptp profile telecom
To enable the PTP telecom profile on the router, use ptp profile telecom in the clock configuration
mode. To disable PTP telecom profile, use the no form of the command.
ptp profile telecom
no ptp profile telecom
Syntax Description This command has no arguments.
Command Modes Clock configuration
Command History
Usage Guidelines This command enables the PTP telecom profile on the router.
Examples The following example shows how to configure a PTP clock and enter clock configuration mode:
Router# configure terminal
Router(config)# ptp clock ordinary domain 0
Router(config-ptp-clk)# ptp profile telecom
Related Commands
Release Modification
15.1(2)SNI Support for this command was introduced on the Cisco ASR 901 router.
Command Description
ptp clock Creates a PTP clock instance.