Cisco ASR 901

1-33
Cisco ASR 901 Aggregation Services Router Command Reference Guide
OL-26031-07
Chapter 1 CLI Command Reference
debug platform tcam error
debug platform tcam error
To enable Ternary Content Addressable Memory (TCAM) error printing, use the debug platform tcam
error command in the privileged EXEC mode. To disable TCAM error printing, use the no debug
platform tcam error command.
debug platform tcam error
no debug platform tcam error
Syntax Description This command has no arguments or keywords.
Command Modes Privileged EXEC (#)
Command History
Examples The following is sample output from the debug platform tcam error command:
Router# debug platform tcam error
TCAM Error printing turned ON
Release Modification
15.3(2)S This command was introduced on the Cisco ASR 901 Series Aggregation
Services Routers.