Cisco ASR 901 User Manual

1-192
Cisco ASR 901 Aggregation Services Router Command Reference Guide
OL-26031-07
Chapter 1 CLI Command Reference
snmp mib rep trap-rate
snmp mib rep trap-rate
To enable the router to send REP traps and sets the number of traps sent per second, use the snmp mib
rep trap-rate command. To remove the traps, enter the no snmp mib rep trap-rate command.
snmp mib rep trap-rate value
no snmp mib rep trap-rate
Syntax Description
Command Modes Global Configuration
Command History
Usage Guidelines The snmp mib rep trap-rate command configures the switch to send REP-specific traps to notify the
SNMP server of link operational status changes and port role changes.
Examples The example shows how to configure the switch to send REP-specific traps:
Router(config)# snmp mib rep trap-rate 500
value Specifies the number of traps sent per second. The range is from 0 to 1000.
The default is 0 (no limit imposed; a trap is sent at every occurrence).
Release Modification
15.1(2)SNG Support for this command was introduced on the Cisco ASR 901 router.

Cisco ASR 901 Specifications

General

Form Factor	Rack-mountable
Operating Temperature	-40 to 65°C
Product Type	Aggregation Services Router
Rack Height	1 RU
Storage Temperature	-40 to 70°C
Humidity	5% to 95% non-condensing
Weight	4.5 kg
Power Supply	AC or DC
Compliance	RoHS, CE, FCC
Redundancy	Dual power supply option
MTBF	320, 000 hours