Cisco ASR 901 User Manual

1-169
Cisco ASR 901 Aggregation Services Router Command Reference Guide
OL-26031-07
Chapter 1 CLI Command Reference
show platform ptp state
show platform ptp state
To display the status of ptp protocol on the Cisco ASR 901 router, use the show platform ptp state
command.
show platform ptp state
Syntax Description This command has no arguments.
Command Modes Privileged EXEC
Command History
Examples The following example shows sample output for
show platform ptp state comamnd:
Router# show platform ptp state
flag = 2
FLL State : 2 (Fast Loop)
FLL Status Duration : 7049 (sec)
Forward Flow Weight : 0.0
Forward Flow Transient-Free : 900 (900 sec Window)
Forward Flow Transient-Free : 3600 (3600 sec Window)
Forward Flow Transactions Used: 23.0 (%)
Forward Flow Oper. Min TDEV : 4254.0 (nsec)
Forward Mafie : 38.0
Forward Flow Min Cluster Width: 7550.0 (nsec)
Forward Flow Mode Width : 21400.0 (nsec)
Reverse Flow Weight : 100.0
Reverse Flow Transient-Free : 900 (900 sec Window)
Reverse Flow Transient-Free : 3600 (3600 sec Window)
Reverse Flow Transactions Used: 200.0 (%)
Reverse Flow Oper. Min TDEV : 487.0 (nsec)
Reverse Mafie : 36.0
Reverse Flow Min Cluster Width: 225.0 (nsec)
Reverse Flow Mode Width : 450.0 (nsec)
Frequency Correction : 257.0 (ppb)
Phase Correction : 0.0 (ppb)
Output TDEV Estimate : 1057.0 (nsec)
Output MDEV Estimate : 1.0 (ppb)
Residual Phase Error : 0.0 (nsec)
Min. Roundtrip Delay : 45.0 (nsec)
Sync Packet Rate : 65 (pkts/sec)
Delay Packet Rate : 65 (pkts/sec)
Forward IPDV % Below Threshold: 0.0
Forward Maximum IPDV : 0.0 (usec)
Release Modification
15.1(2)SNG Support for this command was introduced on the Cisco ASR 901 router.

Cisco ASR 901 Specifications

General

Brand	Cisco
Model	ASR 901
Category	Network Router
Language	English