Cisco ASR 901 User Manual

1-182
Cisco ASR 901 Aggregation Services Router Command Reference Guide
OL-26031-07
Chapter 1 CLI Command Reference
show ptp port running detail
show ptp port running detail
To display the running details of the PTP port, use the show ptp port running detail command.
show ptp port running detail
Syntax Description This command has no arguments or keywords.
Command Modes Privileged EXEC (#)
Command History
Usage Guidelines This command is used to display running details of the PTP port.
Note Accuracy and log variance are not displayed for the telecom profile since the fields are not required for
selecting the best master.
Examples This example shows the output from show ptp port running detail command on a
CiscoASR901router:
Router# show ptp port running detail
PORT [SLAVE] CURRENT PTP MASTER PORT
Protocol Address: 10.10.10.10
Clock Identity: 0xE4:D3:F1:FF:FE:22:FD:B8
PORT [SLAVE] PREVIOUS PTP MASTER PORT
Protocol Address: 30.30.30.30
Clock Identity: 0xE0:2F:6D:FF:FE:74:EF:70
Reason:
PORT [SLAVE] LIST OF PTP MASTER PORTS
LOCAL PRIORITY 0
Protocol Address: 10.10.10.10
Clock Identity: 0xE4:D3:F1:FF:FE:22:FD:B8
PTSF Status:
Alarm In Stream:
Clock Stream Id: 0
Priority1: 128
Priority2: 128
Class: 84
Accuracy: Unknown <===========
Offset (log variance): 0 <==========
Steps Removed: 0
Release Modification
15.4(1)S This command was introduced on the Cisco ASR 901 Series Aggregation
Services Routers.

Cisco ASR 901 Specifications

General

Brand	Cisco
Model	ASR 901
Category	Network Router
Language	English